Skip to main content

Garage Floor Epoxy · Regina, SK

Garage Floor Epoxy in Regina

Decorative, hard-wearing floor coatings installed over properly ground concrete — built for road salt, hot tires, and Saskatchewan freeze-thaw cycles.

  • Fully insured
  • Premium coatings
  • Regina & 100 km radius
Glossy decorative epoxy garage floor with flake finish

What's included

  • Diamond-grind concrete preparation
  • Crack, joint, and spall repair
  • Decorative colour flake blends
  • High-build epoxy base coat
  • UV-stable protective topcoat
  • Most garages completed in one day

Why it's worth doing properly

Preparation decides everything

Grinding opens the concrete so the coating mechanically bonds to the slab. It is the least visible part of the job and the reason a floor either lasts for years or lifts with the first set of hot tires.

Built for winter here

Vehicles carry in brine and slush that soaks into bare concrete and drives surface spalling through freeze-thaw cycles. A bonded coating system keeps that moisture out of the slab.

Easy to keep clean

Oil, road salt, and household chemicals sit on the surface instead of soaking in. Most cleanup is a damp mop, and dust from bare concrete disappears entirely.

A finished-room look

Flake blends hide dirt far better than plain grey concrete and turn the garage into a space that matches the rest of a well-kept home.

Our process

  1. 01

    Slab assessment

    We check the concrete for moisture, existing coatings, cracks, and spalling, then confirm whether a coating is the right call.

  2. 02

    Diamond grinding

    The full floor is ground to a clean, open profile — no acid etching, no coating over old sealer.

  3. 03

    Repairs

    Cracks, control joints, and pitted areas are filled and ground flush so the finished floor reads as one surface.

  4. 04

    Base coat and flake

    A high-build base coat is applied and decorative flake is broadcast into it to the density you chose.

  5. 05

    Scrape and vacuum

    Excess flake is scraped back and vacuumed so the topcoat lays down smooth rather than gritty.

  6. 06

    Topcoat and cure

    A protective topcoat is applied, and we give you clear timing for foot traffic and vehicles before we leave.

Projects we take on

  • Single, double, and triple attached garages
  • Detached garages and workshops
  • Basement and utility room floors
  • Small commercial and shop floors
  • New builds before vehicles ever park inside
  • Re-coats over failed DIY kits after full grinding

What to expect

An empty garage
The space needs to be cleared before we arrive — we'll confirm the timing so you can plan storage and parking.
Noise and dust control
Grinding is loud and is done with dust extraction. We'll tell you which hours to expect it.
Honest slab advice
If the concrete is too deteriorated or moisture-affected to hold a coating, we'll say so rather than take the job.
Clear cure times
You'll get specific guidance on when to walk on the floor and when to drive on it.

Where we work in Regina

We're based in Regina, Saskatchewan and work throughout the city — including Wascana View, Harbour Landing, The Greens on Gardiner, Douglas Place, Lakeview, Cathedral and Windsor Park — plus surrounding communities within roughly 100 km, such as White City, Emerald Park, Pilot Butte, Lumsden, Balgonie.

Wascana ViewHarbour LandingThe Greens on GardinerDouglas PlaceLakeviewCathedralWhitmore ParkAlbert ParkWindsor ParkWhite CityEmerald ParkPilot ButteLumsdenBalgonie

Frequently asked questions

Why does the concrete need to be ground?
Coatings bond to the open profile of concrete, not to a sealed or polished surface. Diamond grinding opens the slab so the coating can key into it. Floors that are only etched or coated over an old sealer are the ones that peel in sheets.
How long does a garage floor take?
Most single and double garages are coated in one working day. Foot traffic is typically fine after about 24 hours and vehicles after roughly 72, though we confirm timings for your specific system on site.
Will road salt damage the coating?
A properly ground and bonded system is built to handle winter salt and slush. We recommend rinsing salt off periodically and wiping spills rather than letting brine sit on the surface.
Can cracks and pitting be repaired first?
Yes. Cracks, spalling, and pitted areas are repaired as part of the preparation stage. Badly deteriorated slabs are assessed honestly — sometimes concrete repair is the right spend before any coating.
What colours are available?
Decorative flake blends range from soft neutrals and granite tones to bolder custom mixes. We bring samples so you can see the blend against your garage lighting before deciding.
Can you coat basements or shop floors too?
Yes. The same systems suit basement floors, workshops, and small commercial spaces where a hard-wearing, easy-to-clean floor matters.

Get a garage floor epoxy quote

Tell us about your project and we'll respond within one business day.